Hitachi WH10DCL Angled Cordless Drill Driver
Angle drills are perfect for getting to those hard to reach or confined places and the Hitachi WH10DCL is one of the best you can get. A tricky DIY job that would be near impossible or take forever to complete can be made incredibly easy in a fraction of the time.
The very reasonable price of the Hitachi WH10DCL Angled Cordless Drill Driver has helped to make it a very popular contender in the cordless drill market. Considering the very affordable price, it's pleasing to note that Hitachi have maintained previous high quality - their power tools have consistently been of high quality, comparable with other respected brands.
The WH10DCL has a useful built-in LED light and comes supplied with a carry case. The trigger-operated LED spotlight will illuminate any dimly lit working area and means that just about any difficult-to-reach or difficult-to-see work area can be worked on with ease. The Hitachi WH10DCL also has a handy low battery indicator. Two batteries provide a constant, steady power source for the duration of every charge.
You can buy the Hitachi WH10DCL as a complete 'ready to use' unit or you can get it cheaper if you want it 'bare' (body only) but that means it comes without a battery or charger.
Hitachi WH10DCL - Impressively Compact And Lightweight
The complete WH10DCL comes with a battery, charger, carry case and driver bit. The drill offers variable speed settings (including reverse). It also has the following features which will make work lighter for you and give the drill a long life.
- ¼" Hex Tool Holder
- Fan-Cooled Motor
- Electric Brake
- Rubber Coated Grip
The Hitachi WH10DCL Angled Cordless Drill Driver has a total length of 375mm and weights in at an impressively lightweight 1 kg (2.2 lbs). Without a battery attached, it's even lighter at just 0.816 kg. The size and weight of the drill adds to its maneuverability and its angled low-profile head means that it can reach the tightest of spaces.
The WH10DCL Cordless 'Angle Impact Driver' gives 265 in/lbs of turning torque so it will easily cope with a wide range of drilling, driving and fastening jobs. Bit replacements are made easy with the 'quick change' 1/4" hex chuck.
The impressive charger of this Hitachi drill circuitry has been designed to prevent overheating and power loss and the balanced tool weight helps to ensure proper wrist alignment and reduced fatigue.
The Hitachi WH10DCL Angled Cordless Drill Driver delivers an impressive no-load speed of 0-2100 RPMs and 0-3400 BPMs and you will quickly find that this tool is essential to have in your tool collection. It comes complete with a Phillips bit and a handy injection-molded carrying case.
The head height of the cordless drill driver is just 53mm and has maximum torque of 30Nm. This means the WH10DCL can tighten bolts up to M12 and easily handle screws up to 4.2x90mm. The 6.35mm (1/4") bit holder will happily accept the majority of standard driver bits.
Lightweight And Eco-Friendly Batteries
The WH10DCL'S lightweight Lithium-Ion batteries hold their charge for longer than other batteries. As a result, you will not notice any discernible loss of power or performance throughout the battery charge. The state-of-the-art design of the Angled Cordless Drill Driver's Lithium-Ion batteries gives your Hitachi WH10DCL up to 260% longer service life than alternative batteries.
This cordless drill's batteries are not just lightweight - they are also very eco-friendly as they contain no harmful cadmium. Hitachi Lithium-Ion batteries also have a very low self-discharge rate so if a battery is not being used, its charge will only drop by 5% in forty days. As a result, far less energy is required to recharge it.
The WH10DCL from Hitachi is a very high quality tool that has clearly been built to provide a long working life. Highly recommended for any DIY enthusiast.

|